Hi, trying to figure out what I might need to do to mount these. I’ve got a 2013 California Special with a somewhat Boss302 front end. Can you please send me images of these mounted? Thanks in advance!
I wish I could but I do not have one. I used a friend’s solo2 car to fit them but since they aren’t allowed in his class, we didn’t attach them. All the one’s I’ve sold have not been returned.
Hi Randy,
I have 2014 Mustang GT track only setup with 380mm x 32mm rotors with Brembo 6 piston calipers off a 2015 S550. I don’t have any brake cooling and would like to remedy that for 2023 season. I can’t find any pics of a complete set-up, so I’m assuming RooDucts is only the intermediate duct and I would still need to find rotor backing plates that fit and hoses to get to the front of the car, etc. Can you help me out with info, pricing, pics, etc. Thanks much !!
Do you have more images of the complete intermediate duct for the 05-14 Mustangs? I am interested, but would like to see more images of it mounted to the chassis if possible. Also, would you be able to make a 4” inlet/outlet version? I have backing plates with a 4” hose interface on the car.
Any update on 5th gen mustang brake ducts? I have a 2010 roush 427R and plan to hit the track starting in April. I can test before and after install with a infrared thermometer.
Hi, it’s less experimental than just being lazy with a web site update. There are a few being used with no reported problems. I hope you may be able to supply more feedback on them.
Hi, trying to figure out what I might need to do to mount these. I’ve got a 2013 California Special with a somewhat Boss302 front end. Can you please send me images of these mounted? Thanks in advance!
I wish I could but I do not have one. I used a friend’s solo2 car to fit them but since they aren’t allowed in his class, we didn’t attach them. All the one’s I’ve sold have not been returned.
Do you have any pictures of these installed? Do I still need some sort of backing plate? Thanks
I don’t have any more pictures of installed units. No, a special backing plate is not needed.
Hi Randy,
I have 2014 Mustang GT track only setup with 380mm x 32mm rotors with Brembo 6 piston calipers off a 2015 S550. I don’t have any brake cooling and would like to remedy that for 2023 season. I can’t find any pics of a complete set-up, so I’m assuming RooDucts is only the intermediate duct and I would still need to find rotor backing plates that fit and hoses to get to the front of the car, etc. Can you help me out with info, pricing, pics, etc. Thanks much !!
Hi,
Do you have more images of the complete intermediate duct for the 05-14 Mustangs? I am interested, but would like to see more images of it mounted to the chassis if possible. Also, would you be able to make a 4” inlet/outlet version? I have backing plates with a 4” hose interface on the car.
Thanks!
I sent the pics, any other questions?
Any update on 5th gen mustang brake ducts? I have a 2010 roush 427R and plan to hit the track starting in April. I can test before and after install with a infrared thermometer.
Hi, it’s less experimental than just being lazy with a web site update. There are a few being used with no reported problems. I hope you may be able to supply more feedback on them.
Might you have ducts that would work on a R53 MINI Cooper S?
Your test duct will arrive today. Make any changes needed, get it back to me and I’ll try to make one to fit.
I’m having trouble visualizing where this would mount on the mustang, can you explain or have any photos of it installed?
I sent the best picture I have. Hope it helped.
Any plans for a kit for the 2015+ Mustangs?
We’ll see what we can do when you get back home. Thanks!