The hottest thing at the 2019 PRI Show was Driver Cooling.
Speed Seat Factory won three awards for their powered seat insert system.
Bentley’s vented seat is homologated, OMP and Racetech also have vented seats.
The original prototype fans are now available for any use you can think of for reliable, up to 45 MPH air, at just 10 Amps or less, with from one outlet to four available.
Years of testing in Prototypes as well as T/A, TC and RallyX.
3″ hose fits the inlet.
7-5/8″ length.
4″ high.
Bracket 4″ wide.
Mounting holes at 3″.
6.25 ounces / 177 grams.
The fan and controller will run on a 4S 14.8 vdc battery or wired directly to the car’s 12 vdc system.
Powerful brushless motor, factory programmed for your speed and draw requirements, no charge for reprogramming, just pay for shipping of the controller both ways.
$250 US
A two speed version is available at extra cost.
The fan uses the brushless brake cooling fan system I developed for my brake ducts.
I suggested their use to Jody and over the years, came up with a pretty good and reliable system. The printed housings wouldn’t hold up to impossible mountings and other installation mistakes and I didn’t want to make hundreds of the same product over and over. His new fans are very nice and work as well or almost as well but the tooling costs make them a bit more dear to buy. If you want the Nylon ones, call Jody at Speed Seat Factory.
Parker Pumper is now offering a fan at $430.00 drawing up to 32 Amps.
Mine is 10A